How to Reupholster a Chair Seat


  • TOTAL TIME: 1 hr
  • SKILL LEVEL: Beginner
  • ESTIMATED COST: $5 to $10
Reupholstering the seat of a dining-style chair is one of the easiest ways to make a big change with little effort. This sturdy, comfortable ladder-back is perfect for the worktable in my library. The lines are simple, but the arms have an unexpected curve. Though the finish is nearly perfect, the seat fabric is boring and filthy. The room doesn't get much natural light, so something bright is best. A geometric pattern would work well with the lines of the chair, but a pattern with some curves will make it more interesting.

My final choice is a linen-look cotton with a bright botanical print. In this case, the simple cotton complements the oak. The birds in the pattern make it feel earthy rather than prissy, though it’s still a nice contrast to the rather masculine look of the chair. Piping the seat in berry-red boucle grounds the light background of the seat fabric, and adds a nice pop of color.

What You'll Need

Equipment / Tools
  • Drill or screwdriver
  • Staple remover
  • Straight pins
  • Fabric pencil or chalk
  • Scissors
  • Sewing machine
  • Staple gun
  • Upholstery fabric
  • Welt cord (optional)


1. Remove the Seat
Turn the chair upside down, and unscrew the seat from the frame, using a drill or screwdriver. Make any necessary repairs to the wood part of the chair -- painting, refinishing, or tightening joints. Make sure everything is dry, not sticky to the touch, then reattach the seat.

Chair seat unscrewed from below to reupholster
If you encounter a tack strip, a long strip of cardboard with tacks that hold the seat to the frame, instead of screws, just pry the seat off with a flat-head screwdriver.
2. Remove the Old Fabric
Turn the seat over. Use a staple remover to remove the old staples and fabric. If the staples are stubborn, pull them out with needle-nose pliers. Save the old seat fabric. You'll need to use it as a pattern.

Old fabric removed from chair seat with staple remover with screwdriver on the side
If the padding is in bad shape, or you just want a softer seat, you can add a new layer of batting. It's sold in most fabric and hobby stores.
3. Center Your Pattern
If your new seat fabric has a pattern, turn the seat right-side up and place the new fabric on top. Pressing around the perimeter of the seat, center your pattern, then mark the corners with straight pins.

Note: You can skip this step if your fabric doesn't have a pattern.

New fabric centered in middle of seat for placement

4. Cut the New Seat Cover
Turn the new fabric right-side down, and put the old seat cover on top as a pattern. Note the locations of your pins, and adjust if needed, feeling underneath. Line up the corner creases of the old seat cover with your straight pins.

Weight down the old cover at the corners, and trace around the old seat cover with a pencil or chalk. Smooth out the edges with your hands as you trace it, so your new cover doesn't end up too small. You can pin the old seat cover to your new fabric before tracing if you don't feel confident about smoothing it as you go.

Remove the old seat cover, then cut out the new one, using the pencil or chalk lines as your guide. To prevent fraying, use your sewing machine to zigzag or serge around the edges of your fabric. If you don't want to sew, fold tape along the edges. Press ​down your fabric if it's wrinkled or creased.

New seat fabric face side down and cut to place on chair seat

5. Attach the Fabric to the Seat
Turn the new seat cover right-side down. Place the seat cushion, also right-side down, on top of it. If you have pins to mark the corners of a patterned fabric, make sure they are aligned with the corners of the seat cushion.

Starting with the top edge, staple once in the center. Repeat with the bottom edge, pulling the fabric tight before you staple. Repeat with each side, and keep pulling the fabric tight before you staple.

Working one side at a time, staple from the center outward until the side is completely stapled. As you work, keep pulling the fabric tight and smooth the fabric underneath from the center. Leave the corners unstapled. Repeat on all sides until everything is stapled but the corners.

New seat fabric folded over seat and stapled

6. Complete the Corners
Grasp one corner of the cover and pull the point toward the center of the seat cushion, then staple it. Arrange the remaining unstapled corner fabric into small even pleats, pull tightly, then staple. Make sure you don't staple over the screw holes. Repeat for the three remaining corners.

Corner fabric pulled to center and secured to seat with stapler
For a professional, finished look add welt cord. You can buy decorative cording in fabric or upholstery shops or make your own.
To apply the welt, arrange it along the edge of the seat and staple the lip (the flat edge) of the welt. When you turn the seat over, only the rounded edge with the cord inside should show.

7. Reattach the Seat
Place the seat on the chair frame and align the screw holes. Get the screws started, so the seat doesn't fall off once you turn the chair upside down. Turn the chair over and tighten the screws until the seat is firmly attached. Be careful not to tighten too much; you don't want to strip the holes.

Chair seat reattached to wooden chair with new upholstered fabric next to materials and tools

Post a Comment

* Please Don't Spam Here. All the Comments are Reviewed by Admin.